Acard PCI-to-IDE ATA-133 Manuel d'utilisateur télécharger pdf (Page 14)

Page 14

6. Enter the first destination drive, then enter the second destination

drive.

7. Enter Y to accept the RAID configuration.

8. On the following screen press ESC to exit the RAID

configuration utility and reboot the computer.

9. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

For Auto Setup

1. As the BIOS boots press F3 when prompted to enter the RAID

BIOS.

2. Press F2 to create a RAID set.

3. Press F3 to create a Mirrored-Striped set.

4. Press A to Auto configure.

5. Press Y to accept the configuration.

6. Press ESC to reboot.

7. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Acard PCI-to-IDE ATA-133 Manuel d'utilisateur Page 14