Acard PCI-to-IDE ATA-133 Manuel d'utilisateur télécharger pdf (Page 10)

Page 10

For Existing Hard Drives with Data

1. As the BIOS boots press F3 when prompted to enter the RAID

BIOS.

2. Press F2 to enter the RAID setup screen.

3. Press F2 to from RAID set 1.

4. Answer N to Automatic setup.

5. Assign Source drive, then assign Destination drive.

6. Press Y to copy from Source to Destination drive.

7. Press N to Offline copy.

8. Answer Y to enable Auto-Rebuild.

9. When asked Are You Sure?, press Y to accept.

10. Press ESC to exit the RAID BIOS.

For Auto Setup

Use this setup on New/Blank hard drives only.

1. As the BIOS boots press F3 when prompted to enter the RAID

BIOS.

2. Press F2 to create a RAID Set.

3. Press F2 to create Mirror Set.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Pas de commentaire

Acard PCI-to-IDE ATA-133 Manuel d'utilisateur Page 10