Acard ADR-7608C Manuel d'utilisateur télécharger pdf (Page 45)

Section8 F/W Update

Step 1. Please copy the Firmware file to the root directory of the CF card or USB drive,

and then insert the CF card or USB drive into the CF slot or USB port on the front panel.

Note: There are two firmware files: (1) Autorun.dat and (2) 76xxxxxx.bin.

Step 2. Now go into "Menu / Advanced Setup / System / Firmware Update" and press the

ENTER button to begin the update. The CF LED on the front panel will start blinking.

Step 3. When the system reports that the update is completed, press the OK button to

reboot the system. The update is now complete.

WARNING: Do not turn off the power during the firmware is updating as this may lead to

unexpected results.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

Pas de commentaire

Acard ADR-7608C Manuel d'utilisateur Page 45